For waterproof (D4) (flat) welding of almost all types of wood Applied to non-load-bearing wooden structures, various forms of wood connections, such as ring joints, joints, mortise and tongue joints, dowels and springs.
Suitable for indoor and outdoor applications such as shipbuilding, facade carpentry and sandwich panels.
It is also suitable for less easy connections (eg slatted wood). It is only applicable if one of the two surfaces is porous (high absorbency).
It is Transparent / white, Liquid reinforced with fibers
Working time: 1 hour
Resistant to (sea) water (D4) Solvent free with limited swelling
Resistant to weather conditions
Can be painted & sanded
caution
Use the adhesive and the surfaces to be bonded only at room temperature. The relative humidity should not exceed 65%. In this way, the formation of bubbles in the final product will be avoided. After pasting it will not be possible to readjust. Always test the adhesive on an (invisible) part of the surface.
The surfaces must be dry, clean and free from dust, rust and grease and must be in good contact. Clean and degrease the surfaces to be glued for best results.
The materials to be welded must be dry, free of grease and dust. The surfaces must fit well together. For best results, remove oil first.